How to adjust the output voltage from the AIM to the mobile device
If you need to adjust the voltage and current that is fed into your device, you can follow these steps:
Related Articles
Error Message -- "Audio Device Error: Could not open WAV device ..."
The following error might be generated when Link Master is not able to communicate with the AIM device. In this case, the problem is the Windows operating system is not able to properly find the audio device that is used by Link Master. To clear the ...LML Error: Audio Device Error: Could not open wave device
When starting my test, I get this error: Answer: This message is telling you that the LML software is not able to communicate with the AIM unit. This could be from a variety of reasons: 1. The Windows OS is stuck and not able to load the proper ...Is there any method to check the audio codec on LML to see whether the device is on EVS or AMR?
Yes, you can see the codec in LML – there is a UI under “General”: Or you can create a custom table:How to use gestures in LML
This is a video version of the content of this article. This article covers how to use the gestures tool in Link Master Logging (LML), including what gestures are how we create gesture scripts how we use gestures during tests Gesture Basics Gestures ...What does BQ and CBQ mean in the Call category?
When looking at this call classification, what does BQ and CBQ mean? Answer: "BQ" stands for "Bad Quality" and it means that at least 1 MOS score was below the threshold that you established. "CBQ" stands for "Continuous Bad Quality" and it means ...